| |
| High Pressure Fluid Control Products |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| High-pressure manifold |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Surface well test manifold |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
| |
|
|
| |
|
1.The high pressure swivel joint has been widely applied in the condition of acid working, mainly including the high pressure discharge pipe, intake pipe, temporary flow pipe, well-testing pipe and pipes of fluid transportation under other high-pressure conditions.
2.Cold working press:42Mpa~105Mpa.
3.Model:type10,type20,type30,type40,type50,type60,type70,type80,
type90,type100.
4.Working environment:1½"~4",special standards can be made to order.
5.Terminal connection:thread(Tr100×12),(Tr110×8);Fig602,1002,1502. |
|
|
| |
|
1.The hammer union manufactured by our company is mainly used in cementing, crushing, acidifying, test and blocking, well control pipeline, high pressure pipe joints and vehicle-mount system.
2.Product classification:Thread hammer union;butt welding hammer union.
3.Terminal connection type:fig100,fig200,fig207,fig211,fig400,fig600,fig602,
fig1002,fig1502,fig2202.
4.Cold working press:42MPa~105MPa.
5.Buckling size:1"~12". |
|
|
| |
High Pressure Fluid Control Products >> Pup joints  |
|
1.The pup joint designed and manufactured by our company is forged by high quality structural alloy steel. Terminal union is forged together with pipe, which is able to avoid disassembling and ensure good sealing, small weight, convenient use and fast installation.
2.Terminal connection:thread(Tr100×12),(Tr110×8);Fig602,1002,1502.
3.Cold working press:42MPa~105MPa.
4.Buckling size:1½"、2"、3"、4" . |
|
|
| |
|
1.High pressure integral joint can connect with all kinds of crushing and cementing equipments at spot.
2.Integral manifold joint includes long sweep elbow, right angle elbow, Tee, Y-tee, manifold Tee, cross tee, manifold cross.
3.Cold working press:42MPa~105MPa.
4.Buckling size:1½"、2"、3"、4" .
5.Terminal connection type:Union（F×M,M×M,F×F）,Welded fitting. |
|
|
| |
|
1.This product is able to work under acid environment containing H2S gas and product color is normally grass green.
2.The product is manufactured in line with PSL3, PSL4 and API 16C of API 6A. Materials and heat treatment strictly follow USA Anti-corrosion Engineer Institute NACE MR0175 and USA Petroleum Institute. Product materials conform to NACE MR0175, ASTM and AISI Standards.
3.We are supplying H2S proof products, including pup joint, plug valve, swivel joint, integral joint, H2S union and other H2S proof products according to users’ needs. Details are shown in product pages. |
|
|
| |
|
1.High pressure plug valve is a very important fitting for cementing, well cementing and crushing and is also applicable to control other high pressure fluid. Plug valve is combined by valve body, seal arcing segment, plug cock, etc.
2.Cold working press:42MPa~105MPa.
3.Buckling size:1"×2"、2"×2"、3"×3".
4.Terminal connection type:Internal thread ,External thread（LP、NU）andUnion head fig602、fig1002、fig1502. |
|
|
| |
|
1.Gate valve is mainly used to control the connection and disconnection of piping and other equipment medium. As the core part of wellhead for production, gate valve has the function of connecting and disconnecting piping medium and control and fluid direction.
2.Cold working press:42MPa~105MPa.
3.union buckling size：1½"、2"、3"、4",Terminal connection typefig602、fig1002、fig1502.
4.Flange buckling size:2-1/16"、2-9/16"、3-1/8"、4-1/16". |
|
|
| |
|
1.High pressure Choke vale is able to adjust medium flow and pressure by altering the runner size of high pressure piping. There are fixed Choke valve and swivel Choke valve. The swivel Choke valve is divided into pin type, plunger type and pore plate type. The swivel one-way Choke valve is divided into hand-operated Choke valve and liquid-operated Choke valve.
2.Cold working press:42MPa~105MPa.
3.Union buckling size：2"、3";Terminal connection typefig602、fig1002、fig1502.
4.Flange buckling size:2-1/16"、2-9/16"、3-1/8"、4-1/16" . |
|
|
| |
|
1.Check valve is mainly used to separate drilling liquid and fluid. It is installed inside the high pressure piping to prevent liquid backstreaming by self-closing baffle. It is manufactured in full conformance with API-6A Standard.
2.Cold working press:70MPa,105MPa.
3.Union buckling size:2",3".
4.Terminal connection type:fig1002,fig1502. |
|
|
|
|
| |
|
1.To ensure safety, the drilling pump is equipped with safety device, i.e. safety valve in the outlet which is able to control the ultimate pressure of the pump within the admitted scope.
2.Cold working press:42MPa~105MPa.
3.Buckling size:2".
4.Terminal connection type:fig1502. |
|
|
| |
|
1.The hose loop can be used in discharge pup joint, transportation pup joint, well testing pup join, well cementing pup joint, and transportation liquid flow under high pressure environment.
2.Cold working press:42MPa~105MPa.
3.Buckling size:2"、3"、4".
4.Terminal connection type:fig602、fig1002、fig1502.
5.We are able to supply hose loop in each specification, pressure, length (Expanded length of hose loop) according to users’ needs. |
|
|
| |
|
1.The choke manifold is the necessary device to implement well pressure control technology. It works on controlling the pressure, maintaining pressure balance inside the well and avoiding overflow and blowout.
2.Special choke lines can be designed and made according to users’ needs.
3.Cold working press:21MPa~105MPa.
4.Buckling size:2-1/16"、2-9/16"、3-1/8"、4-1/16".
5.Working medium: mud, petroleum, natural gas. |
|
|
| |
|
1.The kill manifold is main device for oil-gas well pressure control technology and used to balance well bottom pressure by pumping drilling fluid into the well.
2.Kill manifold can be designed and manufactured specially according to users’ needs.
3.Cold working press:21MPa~105MPa.
4.Buckling size:2-1/16"、2-9/16"、3-1/8"、4-1/16".
5.Working medium: mud, petroleum, natural gas. |
|
|
| |
|
1.The drilling fluid manifold is one of main devices for jet grouting well drilling.
2.The application of drilling fluid manifold is able to improve drilling speed and reduce drilling costs to a great extent.
3.Cold working press:35MPa~105MPa.
4.Buckling size:3"~5".
5.Working medium: mud, petroleum, natural gas. |
| |
|
|
|
| |
|
1.Cementing manifold can control the transportation of cement extracted by cementing pump to well mouth and complete the cementing.
2.Cold working press:21MPa~105MPa.
3.Buckling size:2"、3".
4.Working medium: mud, clean water. |
| |
|
|
|
| |
|
|
1.High pressure Manifolds:Wellhead control head,High pressure ground testing device,High-low pressure combined manifold,fracturing manifold.
2.Cold working press:42MPa~105MPa.
3.Buckling size:
wellhead control head,high pressure ground testing device: 2".2½".3".
High-low pressure combined manifold:2"、3"、4".
Fracturing manifold:2"、3". |
| |
|
|
|
| |
|
1.DongFang Petroleum Machinery Ltd is specialized in manufacturing Fracturing Truck Accessories & Cement Truck Accessories.
2.Main spare parts:Wheel box,Valve,Valve cup,BOP plunger,Butterfly valves,Gate valves,Needle valve,Centrifugal pump.
3.For other cementing truck and fracturing truck accessories, please contact:
Apimanifold@163.com. |
| |
|
|
|
| |
|
|
|
|
|
|
1.The cementing head is a cementing wellhead device equipped with pipe valve, rubber plug and connecting joints and is applicable in cementing operation of petroleum and gas walls.
2.The integral cementing head designed and manufactured by our company belongs to single plug casing cementing head.
3.The cementing head is our patented product. It belongs to integral cementing head which is very safe and can avoid breakage, and is more advanced than welding cementing head which has the defects of slag inclusion or blow pore. |
|
|
|
| |
| |
| |
|
|
|
|
| |
|
|
|
|
|
